View FSGM0465RB_757380.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

march 2010 ? 2009fairchild semiconductor corporation www.fairchildsemi.com FSGM0465RB ? rev. 1.0.2 FSGM0465RB ? green-mode fairchild power switch (fps?) FSGM0465RB green-mode fairchild power switch (fps?) features ? soft burst-mode operation for low standby power consumption and low noise ? precision fixed operating frequency: 66khz ? pulse-by-pulse current limit ? various protection functi ons: overload protection (olp), over-voltage protection (ovp), abnormal over-current protection (aocp), internal thermal shutdown (tsd) with hysteresis, output-short protection (osp), and under-voltage lockout (uvlo) with hysteresis ? auto-restart mode ? internal startup circuit ? internal high-voltage sensefet: 650v ? built-in soft-start: 15ms applications ? power supply for lcd tv and monitor, stb and dvd combination description the FSGM0465RB is an integrated pulse width modulation (pwm) controller and sensefet specifically designed for offline switch-mode power supplies (smps) with minimal external components. the pwm controller includes an integrated fixed-frequency oscillator, under-voltage lockout (uvlo), leading- edge blanking (leb), optimized gate driver, internal soft-start, temperature-comp ensated precise current sources for loop compensation, and self-protection circuitry. compared with a discrete mosfet and pwm controller solution, the fsgm series can reduce total cost, component count, size, and weight; while simultaneously increasing efficiency, productivity, and system reliability. this device provides a basic platform suited for cost-effective design of a flyback converter. ordering information part number package operating junction temperature current limit r ds(on) (max.) output power table (2) replaces device 230v ac 15% (3) 85~265v ac adapter (4) open frame (5) adapter (4) open frame (5) FSGM0465RBwdtu to-220f 6-lead (1) w-forming - 40c ~ +125c 2.70a 2.6 60w 70w 33w 48w fsdm0465re FSGM0465RBudtu to-220f 6-lead (1) u-forming - 40c ~ +125c 2.70a 2.6 60w 70w 33w 48w fsdm0465re FSGM0465RBldtu to-220f 6-lead (1) l-forming - 40c ~ +125c 2.70a 2.6 60w 70w 33w 48w fsdm0465re notes: 1. pb-free package per jedec j-std-020b. 2. the junction temperature can limit the maximum output power. 3. 230v ac or 100/115v ac with voltage doubler. 4. typical continuous power in a non-v entilated enclosed adapter measured at 50 c ambient temperature. 5. maximum practical continuous power in an open-frame design at 50 c ambient temperature.
? 2009 fairchild semiconductor corporation www.fairchildsemi.com FSGM0465RB ? rev. 1.0.2 2 FSGM0465RB ? green-mode fairchild power switch (fps?) application circuit figure 1. typical application circuit internal block diagram figure 2. internal block diagram
? 2009 fairchild semiconductor corporation www.fairchildsemi.com FSGM0465RB ? rev. 1.0.2 3 FSGM0465RB ? green-mode fairchild power switch (fps?) pin configuration figure 3. pin configuration (top view) pin definitions pin # name description 1 drain sensefet drain . high-voltage power sensefet drain connection. 2 gnd ground . this pin is the control ground and the sensefet source. 3 v cc power supply . this pin is the positive supply input, which provides the internal operating current for both startup and steady-state operation. 4 fb feedback . this pin is internally connected to the inverting input of the pwm comparator. the collector of an opto-coupler is typically tied to this pin. for stable operation, a capacitor should be placed between this pin and gnd. if the voltage of this pin reaches 6v, the overload protection triggers, which shuts down the fps. 5 n.c. no connection. 6 v str startup . this pin is connected directly, or through a resistor, to the high-voltage dc link. at startup, the internal high-voltage current source supplies internal bias and charges the external capacitor connected to the v cc pin. once v cc reaches 12v, the internal current source (i ch ) is disabled.
? 2009 fairchild semiconductor corporation www.fairchildsemi.com FSGM0465RB ? rev. 1.0.2 4 FSGM0465RB ? green-mode fairchild power switch (fps?) absolute maximum ratings stresses exceeding the absolute maximum ratings may damage the device. the device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. in addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. the absolute maximum ratings are stress ratings only. symbol parameter min. max. unit v str v str pin voltage 650 v v ds drain pin voltage 650 v v cc v cc pin voltage 26 v v fb feedback pin voltage - 0.3 12.0 v i dm drain current pulsed 10 a i ds continuous switching drain current (6) t c =+25 c 5.0 a t c =+100 c 3.2 a e as single pulsed avalanche energy (7) 250 mj p d total power dissipation (t c =+25 c) (8) 45 w t j maximum junction temperature +150 c operating junction temperature (9) - 40 +125 c t stg storage temperature - 55 +150 c v iso minimum isolation voltage (10) 2.5 v esd electrostatic discharge capability human body model, jesd22-a114 2 kv charged device model, jesd22-c101 2 notes: 6. repetitive peak switching current when the inductive load is assumed: limited by maximum duty (d max =0.75) and junction temperature (see figure 4) . 7. l=75mh, starting t j =25 c. 8. infinite cooling condition (refer to the semi g30-88) . 9. although this parameter guarantees ic operation, it does not guarantee all electrical characteristics. 10. the voltage between the package back side and the lead is guaranteed. figure 4. repetitive peak switching current thermal impedance t a =25c unless otherwise specified. symbol parameter value unit ja junction-to-ambient thermal impedance (11) 62.5 c/w jc junction-to-case thermal impedance (12) 3 c/w notes: 11. infinite cooling condition (refer to the semi g30-88) . 12. free standing with no heat-sink under natural convection.
? 2009 fairchild semiconductor corporation www.fairchildsemi.com FSGM0465RB ? rev. 1.0.2 5 FSGM0465RB ? green-mode fairchild power switch (fps?) electrical characteristics t j =25 c unless otherwise specified. symbol parameter conditions min. typ. max. unit sensefet section bv dss drain-source breakdown voltage v cc =0v, i d =250 a 650 v i dss zero-gate-voltage drain current v ds =520v, t a =+125 c 250 a r ds(on) drain-source on-state resistance v gs =10v, i d =1a 2.1 2.6 ? c iss input capacitance (13) v ds =25v, v gs =0v, f=1mhz 436 pf c oss output capacitance (13) v ds =25v, v gs =0v, f=1mhz 65 pf t r rise time v ds =325v, i d =4a, r g =25 ? 24 ns t f fall time v ds =325v, i d =4a, r g =25 ? 24 ns t d(on) turn-on delay time v ds =325v, i d =4a, r g =25 ? 13 ns t d(off) turn-off delay time v ds =325v, i d = 4a, r g =25 ? 30 ns control section f s switching frequency v cc =14v, v fb =4v, 60 66 72 khz f s switching frequency variation (13) - 25 c < t j < +125 c 5 10 % d max maximum duty ratio v cc =14v, v fb =4v 65 70 75 % d min minimum duty ratio v cc =14v, v fb =0v 0 % i fb feedback source current v fb =0 160 210 260 a v start uvlo threshold voltage v fb =0v, v cc sweep 11 12 13 v v stop after turn-on, v fb =0v 7.0 7.5 8.0 v v op v cc operating range 13 23 v t s/s internal soft-start time v str =40v, v cc sweep 15 ms burst-mode section v burh burst-mode voltage v cc =14v, v fb sweep 0.6 0.7 0.8 v v burl 0.4 0.5 0.6 v hys 200 mv protection section i lim peak drain current limit di/dt=300ma/ s 2.45 2.70 2.95 a v sd shutdown feedback voltage v cc =14v, v fb sweep 5.5 6.0 6.5 v i delay shutdown delay current v cc =14v, v fb =4v 2.5 3.3 4.1 a t leb leading-edge blanking time (13)(14) 300 ns v ovp over-voltage protection v cc sweep 23.0 24.5 26.0 v t osp output short protection (13) threshold time osp triggered when t on v osp (lasts longer than t osp_fb ) 1.0 1.2 1.4 s v osp threshold v fb 1.8 2.0 2.2 v t osp_fb v fb blanking time 2.0 2.5 3.0 s t sd thermal shutdown temperature (13) shutdown temperature +130 +140 +150 c hys hysteresis +30 c continued on the following page?
? 2009 fairchild semiconductor corporation www.fairchildsemi.com FSGM0465RB ? rev. 1.0.2 6 FSGM0465RB ? green-mode fairchild power switch (fps?) electrical characteristics (continued) t j =25 c unless otherwise specified. symbol parameter conditions min. typ. max. unit total device section i op operating supply current, (control part in burst mode) v cc =14v, v fb =0v 1.2 1.6 2.0 ma i ops operating switching current, (control part and sensefet part) v cc =14v, v fb =4v 2.0 2.5 3.0 ma i start start current v cc =11v (before v cc reaches v start ) 0.5 0.6 0.7 ma i ch startup charging current v cc =v fb =0v, v str =40v 1.00 1.15 1.30 ma v str minimum v str supply voltage v cc =v fb =0v, v str sweep 26 v notes: 13. although these parameters are guaranteed, they are not 100% tested in production. 14. t leb includes gate turn-on time. comparison of fsdm0465re and FSGM0465RB function fsdm0465re FSGM0465RB advantages of FSGM0465RB burst mode advanced burst advanced soft burst low noise and low standby power lightning surge strong enhanced sensefet and controller against lightning surge soft-start 10ms (built-in) 15ms (b uilt-in) longer soft-start time protections olp ovp tsd olp ovp osp aocp tsd with hysteresis enhanced protections and high reliability power balance long t cld very short t cld the difference of input power between the low and high input voltage is quite small
? 2009 fairchild semiconductor corporation www.fairchildsemi.com FSGM0465RB ? rev. 1.0.2 7 FSGM0465RB ? green-mode fairchild power switch (fps?) typical performance characteristics characteristic graphs are normalized at t a =25c. 0.80 0.85 0.90 0.95 1.00 1.05 1.10 1.15 1.20 -40 -25 0 25 50 75 100 125 normalized temperature [c] 0.80 0.85 0.90 0.95 1.00 1.05 1.10 1.15 1.20 -40 -25 0 25 50 75 100 125 normalized temperature [c] figure 5. operating supply current (i op ) vs. t a figure 6. operating switching current (i ops ) vs. t a 0.60 0.70 0.80 0.90 1.00 1.10 1.20 1.30 1.40 -40 -25 0 25 50 75 100 125 normalized temperature [c] 0.80 0.85 0.90 0.95 1.00 1.05 1.10 1.15 1.20 -40 -25 0 25 50 75 100 125 normalized temperature [c] figure 7. startup charging current (i ch ) vs. t a figure 8. peak drain current limit (i lim ) vs. t a 0.80 0.85 0.90 0.95 1.00 1.05 1.10 1.15 1.20 -40 -25 0 25 50 75 100 125 normalized temperature [c] 0.80 0.85 0.90 0.95 1.00 1.05 1.10 1.15 1.20 -40 -25 0 25 50 75 100 125 normalized temperature [c] figure 9. feedback source current (i fb ) vs. t a figure 10. shutdown delay current (i delay ) vs. t a
? 2009 fairchild semiconductor corporation www.fairchildsemi.com FSGM0465RB ? rev. 1.0.2 8 FSGM0465RB ? green-mode fairchild power switch (fps?) typical performance characteristics characteristic graphs are normalized at t a =25c. 0.80 0.85 0.90 0.95 1.00 1.05 1.10 1.15 1.20 -40 -25 0 25 50 75 100 125 normalized temperature [c] 0.80 0.85 0.90 0.95 1.00 1.05 1.10 1.15 1.20 -40 -25 0 25 50 75 100 125 normalized temperature [c] figure 11. uvlo threshold voltage (v start ) vs. t a figure 12. uvlo threshold voltage (v stop ) vs. t a 0.80 0.85 0.90 0.95 1.00 1.05 1.10 1.15 1.20 -40 -25 0 25 50 75 100 125 normalized temperature [c] 0.80 0.85 0.90 0.95 1.00 1.05 1.10 1.15 1.20 -40 -25 0 25 50 75 100 125 normalized temperature [c] figure 13. shutdown feedback voltage (v sd ) vs. t a figure 14. over-voltage protection (v ovp ) vs. t a 0.80 0.85 0.90 0.95 1.00 1.05 1.10 1.15 1.20 -40 -25 0 25 50 75 100 125 normalized temperature [c] 0.80 0.85 0.90 0.95 1.00 1.05 1.10 1.15 1.20 -40 -25 0 25 50 75 100 125 normalized temperature [c] figure 15. switching frequency (f s ) vs. t a figure 16. maximim duty ratio (d ma x ) vs. t a
? 2009 fairchild semiconductor corporation www.fairchildsemi.com FSGM0465RB ? rev. 1.0.2 9 FSGM0465RB ? green-mode fairchild power switch (fps?) functional description 1. startup: at startup, an internal high-voltage current source supplies the internal bias and charges the external capacitor (c vcc ) connected to the v cc pin, as illustrated in figure 17. when v cc reaches 12v, the FSGM0465RB begins switching and the internal high- voltage current source is disabled. the FSGM0465RB continues normal switching operation and the power is supplied from the auxiliary transformer winding unless v cc goes below the stop voltage of 7.5v. figure 17. startup block 2. soft-start : the FSGM0465RB has an internal soft- start circuit that increases pwm comparator inverting input voltage, together with the sensefet current, slowly after it starts. the typical soft-start time is 15ms. the pulse width to the power switching device is progressively increased to establish the correct working conditions for transformers, inductors, and capacitors. the voltage on the output capacitors is progressively increased to smoothly establish the required output voltage. this helps prevent transformer saturation and reduces stress on the sec ondary diode during startup. 3. feedback control : this device employs current- mode control, as shown in figure 18. an opto-coupler (such as the fod817) and shun t regulator (such as the ka431) are typically used to implement the feedback network. comparing the feedback voltage with the voltage across the r sense resistor makes it possible to control the switching duty cycle. when the reference pin voltage of the shunt regulator exceeds the internal reference voltage of 2.5v, t he opto-coupler led current increases, pulling down the feedback voltage and reducing drain current. this typically occurs when the input voltage is increased or the output load is decreased. 3.1 pulse-by-pulse current limit : because current- mode control is employed, the peak current through the sensefet is limited by the inverting input of pwm comparator (v fb *), as shown in figure 18. assuming that the 210 a current source flows only through the internal resistor (3r + r =11.6k ? ), the cathode voltage of diode d2 is about 2.4v. since d1 is blocked when the feedback voltage (v fb ) exceeds 2.4v, the maximum voltage of the cathode of d2 is clamped at this voltage. therefore, the peak value of the current through the sensefet is limited. 3.2 leading-edge blanking (leb) : at the instant the internal sensefet is turned on, a high-current spike usually occurs through the sensefet, caused by primary-side capacitance and secondary-side rectifier reverse recovery. excessive voltage across the r sense resistor leads to incorrect feedback operation in the current mode pwm control. to counter this effect, the FSGM0465RB employs a leading-edge blanking (leb) circuit. this circuit inhibits the pwm comparator for t leb (300ns) after the sensefet is turned on. figure 18. pulse width modulation circuit
? 2009 fairchild semiconductor corporation www.fairchildsemi.com FSGM0465RB ? rev. 1.0.2 10 FSGM0465RB ? green-mode fairchild power switch (fps?) 4. protection circuits : the FSGM0465RB has several self-protective functions, such as overload protection (olp), abnormal over-current protection (aocp), output-short protection (osp), over-voltage protection (ovp), and thermal shutdown (tsd). all the protections are implemented as auto-restart. once the fault condition is detected, switching is terminated and the sensefet remains off. this causes v cc to fall. when v b cc b falls to the under-voltage lockout (uvlo) stop voltage of 7.5v, the protection is reset and the startup circuit charges the v cc capacitor. when v cc reaches the start voltage of 12.0v, the FSGM0465RB resumes normal operation. if the fault condition is not removed, the sensefet remains off and v cc drops to stop voltage again. in this manner, the auto-restart can alternately enable and disable the switching of the power sensefet until the fault condition is eliminated. because these protection circ uits are fully integrated into the ic without external components, the reliability is improved without increasing cost. figure 19. auto-restart protection waveforms 4.1 overload protection (olp) : overload is defined as the load current exceeding its normal level due to an unexpected abnormal event. in this situation, the protection circuit should tri gger to protect the smps. however, even when the smps is in normal operation, the overload protection circuit can be triggered during the load transition. to avoid this undesired operation, the overload protection circuit is designed to trigger only after a specified time to determine whether it is a tr ansient situation or a true overload situation. because of the pulse-by-pulse current limit capability, the maximum peak current through the sensefet is lim ited and, therefore, the maximum input power is restricted with a given input voltage. if the output consumes more than this maximum power, the output voltage (v out ) decreases below the set voltage. this reduces the current through the opto-coupler led, which also reduces the opto-coupler transistor current, thus increasing the feedback voltage (v fb ). if v fb exceeds 2.4v, d1 is blocked and the 3.3 a current source starts to charge c fb slowly up . in this condition, v fb continues increasing until it reaches 6.0v, when the switching operation is terminated, as shown in figure 20. the delay time for shutdown is the time required to charge c fb from 2.4v to 6.0v with 3.3 a. a 25 ~ 50ms delay is typical for most applications. this protection is implemented in auto-restart mode. figure 20. overload protection 4.2 abnormal over-current protection (aocp) : when the secondary rectifier diodes or the transformer pins are shor ted, a steep current with extremely high di/dt can flow through the sensefet during the minimum turn-on time. even though the FSGM0465RB has overload protection, it is not enough to protect the FSGM0465RB in that abnormal case; since severe current stress is imposed on the sensefet until olp is triggered. the FSGM0465RB internal aocp circuit is shown in figure 21. when the gate turn-on signal is applied to the power sensefet, the aocp block is enabled and monitors the current through the sensing resistor. the voltage across the resistor is compared with a preset aocp level. if the sensing resistor voltage is greater than the aocp level, the set signal is applied to the s - r latch, resulting in the shutdown of the smps. figure 21. abnormal over -current protection
? 2009 fairchild semiconductor corporation www.fairchildsemi.com FSGM0465RB ? rev. 1.0.2 11 FSGM0465RB ? green-mode fairchild power switch (fps?) 4.3. output-short protection (osp) : if the output is shorted, steep current with extremely high di/dt can flow through the sensefet during the minimum turn- on time. such a steep current brings high-voltage stress on the drain of the sensefet when turned off. to protect the device from this abnormal condition, osp is included. it is comprised of detecting v fb and sensefet turn-on time. when the v fb is higher than 2v and the sensefet turn-on time is lower than 1.2 s, the FSGM0465RB recognizes this condition as an abnormal error and shuts down pwm switching until v cc reaches v start again. an abnormal condition output short is shown in figure 22. figure 22. output-short protection 4.4 over-voltage protection (ovp): if the secondary-side feedback circuit malfunctions or a solder defect causes an opening in the feedback path, the current through t he opto-coupler transistor becomes almost zero. then v fb climbs up in a similar manner to the overload situation, forcing the preset maximum current to be supplied to the smps until the overload protection is triggered. because more energy than required is provided to the output, the output voltage may exceed the rated voltage before the overload protection is triggered, resulting in the breakdown of the devices in the secondary side. to prevent this situation, an ovp circuit is employed. in general, the v cc is proportional to the output voltage and the FSGM0465RB uses v cc instead of directly monitoring the output voltage. if v cc exceeds 24.5v, an ovp circuit is triggered, resulting in the termination of the switching operation. to avoid undesired activation of ovp during normal operation, v cc should be designed to be below 24.5v. 4.5 thermal shutdown (tsd) : the sensefet and the control ic on a die in one package makes it easier for the control ic to detect the over temperature of the sensefet. if the temperature exceeds ~140 c, the thermal shutdown is triggered and the FSGM0465RB stops operation. the FSGM0465RB operates in auto-restart mode until the temperature decreases to around 110 c, when normal operation resumes. 5. soft burst-mode operation : to minimize power dissipation in standby mode, the FSGM0465RB enters burst-mode operation. as the load decreases, the feedback voltage decreases. as shown in figure 23, the device automatically enters burst mode when the feedback voltage drops below v burl (500mv). at this point, switching stops and the output voltages start to drop at a rate dependent on standby current load. this causes the feedback voltage to rise. once it passes v burh (700mv), switching resumes. at this point, the drain current peak increases gradually. this soft burst- mode can reduce audible noise during burst-mode operation. the feedback voltage then falls and the process repeats. burst-m ode operation alternately enables and disables switching of the sensefet, thereby reducing switching loss in standby mode. figure 23. burst-mode operation
? 2009 fairchild semiconductor corporation www.fairchildsemi.com FSGM0465RB ? rev. 1.0.2 12 FSGM0465RB ? green-mode fairchild power switch (fps?) typical application circuit application input voltage rated output rated power lcd tv, monitor power supply 390v dc 5.0v(4a) 12.0v(4a) 68w key design notes: 1. the delay time for overload protection is designed to be about 25ms with c105 (22nf). olp time between 25ms (22nf) and 50ms (43nf) is recommended. 2. the smd-type capacitor (c106) must be placed as close as possible to the v cc pin to avoid malfunction by abrupt pulsating noises and to improve esd and surge immunity. capacitance between 100nf and 220nf is recommended. 1. schematic figure 24. schematic of demonstration board
? 2009 fairchild semiconductor corporation www.fairchildsemi.com FSGM0465RB ? rev. 1.0.2 13 FSGM0465RB ? green-mode fairchild power switch (fps?) 2. transformer figure 25. schematic of transformer 3. winding specification pin (s f) wire turns winding method barrier tape top bot ts n p /2 3 2 0.33 1 22 solenoid winding 2.0mm 1 insulation : polyester tape t=0.025mm, 2 layers n 12v 12 9 0.4 3 (tiw) 4 solenoid winding 2.0mm 1 insulation : polyester tape t=0.025mm, 2 layers n 5v 7 10 0.4 4 (tiw) 3 solenoid winding 2.0mm 1 insulation : polyester tape t=0.025mm, 2 layers n a 6 5 0.2 1 7 solenoid winding 4.0mm 4.0mm 1 insulation : polyester tape t=0.025mm, 2 layers n 5v 8 11 0.4 4 (tiw) 3 solenoid winding 2.0mm 1 insulation : polyester tape t=0.025mm, 2 layers n p /2 2 1 0.33 1 21 solenoid winding 2.0mm 1 insulation : polyester tape t=0.025mm, 2 layers 4. electrical characteristics pin specification remark inductance 1 3 700 h 7% 67khz, 1v leakage 1 3 15 h maximum short all other pins 5. core & bobbin ? core: eer3019 (ae=134.0mm 2 ) ? bobbin: eer3019
? 2009 fairchild semiconductor corporation www.fairchildsemi.com FSGM0465RB ? rev. 1.0.2 14 FSGM0465RB ? green-mode fairchild power switch (fps?) 6. bill of materials part # value note part # value note fuse capacitor f101 250v 3.15a c101 220nf/275v box (pilkor) ntc c102 150nf/275v box (pilkor) ntc101 5d-11 dsc c103 100 f/400v electrolytic (samyoung) resistor c104 3.3nf/630v film (sehwa) r101 1.5m ? , j 0.5w c105 22nf/100v film (sehwa) r102 75k ? , j 1/2w c106 220nf smd (2012) r103 33k ? , j 1w c107 47 f/50v electrolytic (samyoung) r104 62 ? , j 1/2w c201 1000 f/25v electrolytic (samyoung) r201 330 ? , j 1/4w c202 1000 f/25v electrolytic (samyoung) r202 1.2k ? , f 1/4w, 1% c203 1000 f/25v electrolytic (samyoung) r203 18k ? , f 1/4w, 1% c204 2200 f/10v electrolytic (samyoung) r204 8k ? , f 1/4w, 1% c205 1000 f/16v electrolytic (samyoung) r205 8k ? , f 1/4w, 1% c206 1000 f/16v electrolytic (samyoung) ic c207 47nf/100v film (sehwa) FSGM0465RB FSGM0465RB fairchild semiconductor c208 100nf smd (2012) ic201 ka431lz fairchild semiconductor c209 100nf smd (2012) ic301 fod817b fairchild semiconductor c301 4.7nf/y2 y-cap (samhwa) diode inductor d101 rgp15m vishay lf101 20mh line filter 0.7? d102 uf4004 vishay l201 5 h 5a rating zd101 1n4749 vishay l202 5 h 5a rating d201 mbr20150ct fairchild semiconductor jumper d202 fypf2006dn fairchild semiconductor j101 bd101 g3sba60 vishay transformer t101 700 h
? 2009 fairchild semiconductor corporation www.fairchildsemi.com FSGM0465RB ? rev. 1.0.2 15 FSGM0465RB ? green-mode fairchild power switch (fps?) physical dimensions notes: unless otherwise specified a) this package does not comply to any current packaging standard. b) all dimensions are in millimeters. c) dimensions are exclusive of burrs, mold flash, and tie bar extrusions. d) leadform option a e) dfawing filename: to220a06rev4 1.40 1.20 0.80 0.70 0.70 0.50 1,3,5 2,4,6 6 1 8.13 7.13 16.07 15.67 3.48 2.88 3.06 2.46 24.00 23.00 20.00 19.00 6.90 6.50 2.74 2.34 3.40 3.20 10.16 9.96 (5.40) (1.13) 0.60 0.45 (0.48) (0.70) 5 5 (7.15) (13.05) 2.19 1.27 3.81 1.75 (7.00) ? 3.28 3.08 r0.55 r0.55 figure 26. to - 220f - 6l (w - forming) package drawings are provided as a service to customers considering fairchild components. drawings may change in any manner without notice. please note the revision and/or date on the drawing and contact a fairchild semiconductor representative to ver ify or obtain the most recent revision. package specifications do not expand the terms of fairchild?s worldwide terms and condition s, specifically the warranty therein, which covers fairchild products. always visit fairchild semiconductor?s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/ .
? 2009 fairchild semiconductor corporation www.fairchildsemi.com FSGM0465RB ? rev. 1.0.2 16 FSGM0465RB ? green-mode fairchild power switch (fps?) physical dimensions 5 5 ? 3.28 3.08 (7.00) 1.75 3.81 1.27 2.19 (0.70) 0.60 0.45 (0.88) (5.40) 10.36 9.96 3.40 3.20 2.74 2.34 19.97 18.97 3.06 2.46 3.48 2.88 16.07 15.67 8.13 7.13 #1 #6 #2,4 #3,5 0.70 0.50 5plcs 0.80 0.70 5plcs 1.40 1.20 24.00 23.00 13.05 7.15 7.29 6.69 #1,6 (3.81) (0.48) a b 5.18 4.98 6.88 6.48 0.20 ab 4.80 4.40 notes: a) no package standard applies. b) dimensions are exclusive of burrs, mold flash, and tie bar extrusions. c) dimensions are in millimeters. d) drawing filename : mkt-to220f06rev2 18.94 17.94 r0.55 r0.55 r0.55 figure 27. to - 220f - 6l (u - forming) package drawings are provided as a service to customers considering fairchild components. drawings may change in any manner without notice. please note the revision and/or date on the drawing and contact a fairchild semiconductor representative to ver ify or obtain the most recent revision. package specifications do not expand the terms of fairchild?s worldwide terms and condition s, specifically the warranty therein, which covers fairchild products. always visit fairchild semiconductor?s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/ .
? 2009 fairchild semiconductor corporation www.fairchildsemi.com FSGM0465RB ? rev. 1.0.2 17 FSGM0465RB ? green-mode fairchild power switch (fps?) physical dimensions notes: a) no package standard applies. b) dimensions are exclusive of burrs, mold flash, and tie bar extrusions. c) dimensions are in millimeters. d) drawing filename : mkt-to220e06rev2 16.08 15.68 ? 3.28 3.08 2.19 1.27 3.81 1.75 0.85 0.75 5plcs 5 5 (0.70) 0.61 0.46 3.18 #2,4,6 #1,3,5 2.74 2.34 #1 #6 r1.00 0.65 0.55 6plcs 3.40 3.20 10.36 9.96 4.90 4.70 6plcs 6.88 6.48 b (1.13) 1.30 1.05 a 0.20 ab c 4.80 4.40 (17.83) (21.01) 0.05 c r1.00 5.18 4.98 figure 28. to - 220f - 6l (l - forming) package drawings are provided as a service to customers considering fairchild components. drawings may change in any manner without notice. please note the revision and/or date on the drawing and contact a fairchild semiconductor representative to ver ify or obtain the most recent revision. package specifications do not expand the terms of fairchild?s worldwide terms and condition s, specifically the warranty therein, which covers fairchild products. always visit fairchild semiconductor?s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/ .
? 2009 fairchild semiconductor corporation www.fairchildsemi.com FSGM0465RB ? rev. 1.0.2 18 FSGM0465RB ? green-mode fairchild power switch (fps?)

▲Up To Search▲

Price & Availability of FSGM0465RB

	To Download FSGM0465RB Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .